Icom IC-7800 Instruction Manual - Page 157
Miscellaneous Others set mode
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
12 SET MODE I Miscellaneous (Others) set mode This item is used for a simple frequency check of the transceiver. (default: OFF) See p. 13-5 for calibration procedure. NOTE: Turn the calibration marker OFF after checking the frequency of the transceiver. A beep sounds each time a switch is pushed to confirm it. This function can be turned OFF for silent operation. (default: ON) The beep output level can be set in level set mode. (p. 12-5) A beep sounds when an operating frequency enters or exits an amateur band. This functions independent of the confirmation beep setting (above). (default: ON) The beep output level can be set in level set mode. (p. 12-5) Sets the desired key-touch beep sound frequency during main readout operation within 500 to 2000 Hz in 10 Hz steps. (default: 1000 Hz) Set the different frequency from "Beep Sound (SUB)" as below to distinguish between main and sub. Sets the desired key-touch beep sound frequency during sub readout operation within 500 to 2000 Hz in 10 Hz steps. (default: 1000 Hz) Set the different frequency from "Beep Sound (MAIN)" as above to distinguish between main and sub. When this item is set to ON, pushing [DUALWATCH] for 1 sec. sets the sub readout frequency to the main readout frequency and activates dualwatch operation. (default: ON) See p. 5-16 for details. 12-14