Icom IC-7800 Instruction Manual - Page 79
Operating FM
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4 RECEIVE AND TRANSMIT I Operating FM [TX] indicator [MIC] [RX] indicator Band keys [FILTER] [AF] [AM/FM] Main dial Appears q Push a band key to select the desired band. w Push [AM/FM] to select FM. • "FM" indicator appears. • After FM mode is selected, push [AM/FM] to toggle be- tween FM and AM modes. e Rotate the main dial to tune the desired frequency. • The S-meter indicates received signal strength when signal is received. • 10 kHz tuning step is preset for the FM mode. • Push [FILTER] several times to select the desired filter width. r Rotate [AF] to set audio to a comfortable listening level. t Push [TRANSMIT] or [PTT] (microphone) to trans- mit. • The TX indicator lights red. y Speak into the microphone at your normal voice level. • Adjust the microphone gain with [MIC] at this step, if necessary. • FM narrow transmission is available when "FIL2" or "FIL3" is selected. u Push [TRANSMIT] or release [PTT] (microphone) to return to receive. D Convenient functions for receive • Preamp (p. 5-9) ➥ Push [P.AMP] several times to set the preamp OFF, preamp 1 ON or preamp 2 ON. • "P.AMP1" or "P.AMP2" appears when the preamp 1 or preamp 2 is ON. Main and sub have independent preamp controls. • Auto notch filter (p. 5-19) ➥ Push [NOTCH] switch to turn the auto notch func- tion ON and OFF. • Notch indicator (above [NOTCH] switch) lights when either the manual notch is ON. • Attenuator (p. 5-9) ➥ Push [ATT] several times to set the attenuator in 6 dB steps. • Pushing [ATT] for 1 sec. to set the attenuator in 3 dB steps. • "ATT" and attenuation level appear when the attenu- ator is ON. D Convenient functions for transmit • VOX (voice operated transmit) (p. 6-2) ➥ Push [VOX/BK-IN] to turn the VOX function ON and OFF. • "VOX" appears when the VOX function is ON. • Transmit quality monitor (p. 6-4) ➥ Push [MONI] to turn the monitor function ON and OFF. • Rotate [MONI GAIN] to adjust the monitor gain. • Monitor indicator (above [MONI] switch) lights when the monitor function is ON. • Audio tone control (p. 12-4) ➥ Push [F-7•SET] then [F-1•LEVEL] to enter level set mode. Select an item with [F-1•Y]/[F-2•Z] then rotate the main dial to adjust the audio tone. 4-31