Icom IC-7800 Instruction Manual - Page 27
Unpacking, Antenna jumper cable connection, Selecting a location, Rack mounting handle attachment - radio
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2 INSTALLATION AND CONNECTIONS I Unpacking After unpacking, immediately report any damage to the delivering carrier or dealer. Keep the shipping cartons. For a description and a diagram of accessory equipment included with the IC-7800, see 'Supplied accessories' on p. iii of this manual. I Antenna jumper cable connection Connect the supplied coaxial cable (terminated with BNC connectors) between [RX ANT A- IN] and [RX ANT A- OUT], and, [RX ANT B- IN] and [RX ANT B- OUT], respectively. When connecting an external filter unit, pre-amplifier, etc., connect the unit between [RX ANT A/B- IN] and [RX ANT A/B- OUT] connectors. I Selecting a location Select a location for the transceiver that allows adequate air circulation, free from extreme heat, cold, or vibrations, and away from TV sets, TV antenna elements, radios and other electromagnetic sources. The base of the transceiver has an adjustable stand for desktop use. Set the stand to one of two angles depending on your operating preference. I Rack mounting handle attachment Remove the four screws from both sides of the front panel and the two screws from both sides of the side panel, then attach the rack mounting handles to the sides of the transceiver using the supplied screws. 2-2