Icom IC-7800 Instruction Manual - Page 120

8 MEMORY OPERATION I Memory channels The transceiver has 101 memory channels. Memory mode is very useful for quickly changing to often-used frequencies. All 101 memory channels are tunable which means the programmed frequency can be tuned temporarily with the main dial, etc. in memory mode. MEMORY CHANNEL Regular memory channels Scan edge memory channels MEMORY CHANNEL NUMBER 1-99 P1, P2 CAPABILITY TRANSFER TO VFO One frequency and one mode in each memory channel. Yes One frequency and one mode in each memory channel as scan Yes edges for programmed scan. OVERWRITING Yes Yes CLEAR Yes No I Memory channel selection D Using the [Y]/[Z] keys [Y] [Z] [V/M] q Push [V/M] to select memory mode. w Push [Y]/[Z] several times to select the desired memory channel. • Push and hold [Y]/[Z] for continuous selection. • [UP] and [DN] on the microphone can also be used. e To return to VFO mode, push [V/M] again. D Using the keypad Keypad [Y] [Z] [V/M] [F-INP•ENT] q Push [V/M] to select memory mode. w Push [F-INP•ENT]. e Push the desired memory channel number using the keypad. • Enter 100 or 101 to select scan edge channel P1 or P2, respectively. r Push [Y] or [Z] to select the desired memory chan- nel. [EXAMPLE] To select the memory channel 3; - Push [F-INP•ENT], [7•3], then push [Y] or [Z]. To select the memory channel 12; - Push [F-INP•ENT], [1.8•1], [3.5•2], then push [Y] or [Z]. To select the scan edge channel P1; - Push [F-INP•ENT], [1.8•1], [50•0], [50•0], then push [Y] or [Z]. To select the scan edge channel P2; - Push [F-INP•ENT], [1.8•1], [50•0], [1.8•1], then push [Y] or [Z]. 8-2