Icom IC-7800 Instruction Manual - Page 121

8 MEMORY OPERATION I Memory list screen The memory list screen simultaneously shows 9 memory channels and their programmed contents. 15 memory channels can be displayed in the wide memory list screen. You can select a desired memory channel from memory list screen. D Selecting a memory channel using the memory list screen [F-4•MEMORY] [Z] [Y] q Push [EXIT/SET] several times to close a multi-func- tion screen, if necessary. w Push [F-4•MEMORY] to select memory list screen. • [F-7•WIDE] switches the standard and wide screens. e While pushing [F-1•ROLL], rotate the main dial to select the desired memory channel. • [Y] and [Z] can also be used. r Push [EXIT/SET] to exit memory list screen. [F-1•ROLL] [F-7•WIDE] [EXIT/SET] Main dial • Memory list screen D Confirming programmed memory channels q Select memory list screen as described above. w While pushing [F-1•ROLL], rotate the main dial to scroll the screen. e Push [F-2•SET] to select the highlighted memory channel, if desired. • "≈" appears beside the selected memory channel num- [F-1•ROLL] [F-2•SET] [EXIT/SET] Main dial ber in the memory list screen and the selected memory channel contents are displayed below the frequency readout. r Push [EXIT/SET] to exit memory list screen. 8-3