Icom IC-7800 Instruction Manual - Page 114
Recording a message for transmit
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
7 VOICE RECORDER FUNCTIONS I Recording a message for transmit To transmit a message using the voice recorder, record the desired message in advance as described below. The IC-7800 has digital voice memories for transmission, up to 4 channels and the total message length of up to 99 sec. can be recorded. D Recording [F-1•Y] [F-2•Z] [F-4•REC] Appears Adjust [MIC] control so that this indicator reads within 100%. q Push [EXIT/SET] several times to close a multi-func- tion screen, if necessary. wPush [F-2•VOICE] to call up the voice recorder screen. e Push [EXIT/SET] to select voice recorder menu. r Push [F-2•MIC REC] to select the voice mic. record screen. t Push [F-1•Y] or [F-2•Z] to select the desired mem- ory channel. y Push [F-4•REC] for 1 sec. to start recording. •" " indicator appears. • Speak into the microphone without pushing [PTT]. • Previously recorded contents are cleared. • Audio output from the internal speaker is automatically muted. u While speaking into the microphone with your nor- mal voice level, adjust the [MIC] control so that the [MIC-REC LEVEL] indicator reads within 100%. i Push [F-4•REC] momentarily to stop recording. • The recording is terminated automatically when the re- maining time becomes 0 sec. o Push [EXIT/SET] twice to exit the voice recorder screen. D Confirming a message for transmit [F-1•Y] [F-2•Z] [F-3•PLAY] q Perform the steps q to r as "D Recording" above. w Push [F-1•Y] or [F-2•Z] to select the desired mem- ory channel. e Push [F-3•PLAY] to playback the recorded contents. •" " indicator appears. r Push [F-3•PLAY] again to stop playback. • Playback is terminated automatically when all of the recorded contents in the channel are played. t Push [EXIT/SET] twice to exit the voice recorder screen. 7-6