Icom IC-7800 Instruction Manual - Page 66
DRTTY decode set mode
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4 RECEIVE AND TRANSMIT D RTTY decode set mode [F-3 F-7•WIDE] [F-1•Y] [F-2•Z][F-4•DEF] [EXIT/SET] Main dial • RTTY decode set mode screen This set mode is used to set the decode USOS function, time stamp setting, etc. • Setting contents q During RTTY mode operation, push [F-3•DECODE] to select RTTY decode screen. w Push [F-1•] to select RTTY decode menu 2, then push [F-6•SET] to select RTTY decode set mode. • Push [F-7•WIDE] to toggle the screen size from normal and wide. e Push [F-1•Y] or [F-2•Z] to select the desired set item. r Set the desired condition using the main dial. • Push [F-4•DEF] for 1 sec. to select a default condition or value. • Push [F-3•Ω ≈] to select the set contents for some items. t Push [EXIT/SET] to exit from set mode. Set the FFT scope waveform averaging function from 2 to 4 and OFF. (default: OFF) Recommendation! If you use the FFT scope waveform for tuning, use the default or smaller number setting is recommended. Set the color for the FFT scope waveform. • The color is set in RGB format. • The set color is indicated in the box beside the RGB scale. • Push [F-3•Ω ≈] to select R (Red), G (Green) and B (Blue), and then rotate the main dial to set the ratio from 0 to 255. Turn the letter code decoding after receiving a "space" (USOS; UnShift On Space function) capability ON and OFF. • ON : Decode as letter code. • OFF : Decode as character code. Selects the new line code of the internal RTTY decoder. CR: Carriage Return, LF: Line Feed • CR,LF,CR;LF : Makes new line with any codes. • CR+LF : Makes new line with CR+LF code only. Selects the diddle condition. • BLANK • LTRS • OFF : Transmits blank code during no code transmission. : Transmits letter code during no code transmission. : Turns the diddle function OFF. 4-18