Icom IC-7800 Instruction Manual - Page 98
Dualwatch operation
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5 FUNCTIONS FOR RECEIVE I Dualwatch operation [MAIN] [SUB] [SPLIT] [AF] for sub [CHANGE] [DUALWATCH] Sub dial • Split frequency operation during dualwatch Dualwatch monitors 2 frequencies simultaneously. The IC-7800 has 2 independent receiver circuits so that you can use dualwatch with no compromises, even on different bands and modes. q Set the desired frequency and mode into the main band. w Push [DUALWATCH]. •" " appears. • Pushing [DUALWATCH] for 1 sec., the sub band is equalized at the same time. This quick dualwatch func- tion can be turned OFF in set mode. (p. 12-14) e Rotate the sub dial to set the desired frequency. r Push [SUB] to enables the sub band access when changing the frequency band, operating mode, etc. in sub band. • Push [MAIN] for the main band access. tRotate [AF] for sub band to adjust the sub band audio level. y To transmit on the sub band readout, push [CHANGE] or [SPLIT]. NOTE: • A beat note may be heard depending on the fre- quency combination. • Receiver sensitivity will be decreased when the same frequency band and the same antenna are selected during dualwatch. • The RIT function can be used for the main readout only. • The ∂TX function can be used for the transmit readout (main readout when the split function OFF; sub readout when the split function ON). 5-16