Icom IC-7800 Instruction Manual - Page 142
Daily timer setting
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
CLOCK AND TIMERS 11 I Daily timer setting [F-2•TIMER2]/[F-2•≈] [F-4•TIMER4]/[F-4•CLR] [F-7•SET] [TIMER] [F-3•TIMER3] [EXIT/SET] Main dial [F-1•TIMER1]/[F-1•Ω] The transceiver turns power ON and/or OFF automatically on the specified day and time, with the specified frequency settings in each main and sub readout. q Push [EXIT/SET] several times to close multi-function screen, if necessary. w Push [TIMER] for 1 sec. to select timer set screen. e Push one of [F-1•TIMER1] to [F-5•TIMER5] to se- lect the desired timer. r Rotate the main dial to select the timer action ON and OFF. t Push [F-2•≈] to select the "DAY" cell, then rotate the main dial to select the desired day of the week. • Select "- - -" not to specify the day of the week. The timer will function every day in this case. • Once a day of the week is selected, push [F-4•CLR] for 1 sec. to select "- - -." y Push [F-2•≈] to select the "REPEAT" cell, then ro- tate the main dial to select the repeat function ON and OFF. • ON : The timer functions every selected day of the week. (repeats) • OFF : The timer does not repeat. u Push [F-2•≈] to select the "ON" cell, then rotate the main dial to set the desired transceiver power ON time. • When using power OFF timer only, push [F-4•CLR] for 1 sec. to select "- - -." i Push [F-2•≈] to select the "OFF" cell, then rotate the main dial to set the desired transceiver power OFF time. • When using power ON timer only, push [F-4•CLR] for 1 sec. to select "- - -." o Push [F-2•≈] to select the "MAIN" cell, then rotate the main dial to select the desired memory channel number in the main readout. • If using the currently set VFO condition in main readout, push [F-4•CLR] for 1 sec. to select "- - -." !0 Push [F-2•≈] to select the "SUB" cell, then rotate the main dial to select the desired memory channel number in the sub readout. • If using the currently set VFO condition in sub readout, push [F-4•CLR] for 1 sec. to select "- - -." !1 Push [F-7•SET] to set the timer. • The timer indicator above [TIMER] switch lights green. !2 Repeat steps e to !1 to set other timers, if desired. !3 Push [EXIT/SET] to exit timer set screen. 11-3