Icom IC-7800 Instruction Manual - Page 46
Meter type selection
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
D Meter type selection [F-1•Y] [F-2•Z] [F-7•SET] [EXIT/SET] [F-3•DISPLAY] 3 BASIC OPERATIONS A total of 3 meter types are available in the IC-7800- Standard, Edgewise and Bar meters. Follow the instructions below for the meter type selection. q Push [EXIT/SET] several times to return to normal screen, if necessary. w Push [F-7•SET], then push [F-3•DISPLAY] to select display set mode. e Push [F-1•Y] or [F-2•Z] to select "Meter type (Normal Screen)" item. r Rotate main dial to select the desired meter type from "Standard," "Edgewise" and "Bar." t Push [EXIT/SET] to exit display set mode. • Edgewise meter • Bar meter 3-11
3-11
D
Meter type selection
A total of 3 meter types are available in the IC-7800—
Standard, Edgewise and Bar meters.
Follow the instructions below for the meter type selec-
tion.
q
Push [EXIT/SET] several times to return to normal
screen, if necessary.
w
Push [F-7•SET], then push [F-3•DISPLAY] to select
display set mode.
e
Push [F-1•
Y
] or [F-2•
Z
] to select “Meter type (Nor-
mal Screen)” item.
r
Rotate main dial to select the desired meter type
from “Standard,” “Edgewise” and “Bar.”
t
Push [EXIT/SET] to exit display set mode.
•
Edgewise meter
•
Bar meter
[F-1
•
Y
]
[EXIT/SET]
[F-7
•
SET]
[F-2
•
Z
]
[F-3
•
DISPLAY]
3
BASIC OPERATIONS