Icom IC-7800 Instruction Manual - Page 88
Functions For Receive
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5 FUNCTIONS FOR RECEIVE D Scope set mode (continued) Select the sweeping speed for the ±50 kHz span selection from SLOW, MID and FAST. Select the sweeping speed for the ±100 kHz span selection from SLOW, MID and FAST. Select the sweeping speed for the ±250 kHz span selection from SLOW, MID and FAST. Set the scope edge frequencies for fix mode scope with below 1.6 MHz band selection. • Set the frequencies within 0.030 to 1.600 MHz range in 1 kHz steps. Up to 500 kHz band width can be specified, so either edge frequency will be set to the difference between higher and lower frequencies become 5 to 500 kHz automatically while setting another edge frequency. Set the scope edge frequencies for fix mode scope when 1.6 to 2 MHz band is selected. • Set the frequencies within 1.600 to 2.000 MHz range in 1 kHz steps. Set the scope edge frequencies for fix mode scope when 2 to 6 MHz band is selected. • Set the frequencies within 2.000 to 6.000 MHz range in 1 kHz steps. Up to 500 kHz band width can be specified, so either edge frequency will be set to the difference between higher and lower frequencies become 5 to 500 kHz automatically while setting another edge frequency. Set the scope edge frequencies for fix mode scope when 6 to 8 MHz band is selected. • Set the frequencies within 6.000 to 8.000 MHz range in 1 kHz steps. Up to 500 kHz band width can be specified, so either edge frequency will be set to the difference between higher and lower frequencies become 5 to 500 kHz automatically while setting another edge frequency. 5-6