Icom IC-7800 Instruction Manual - Page 162

SET MODE 12 I Miscellaneous (Others) set mode (continued) Selects the displayed frequency shift function from ON and OFF. (default: OFF) When this function is activated, the receiving signal can be kept to receive even when the operating mode is changed between SSB and CW. The frequency shifting value may differ according to the CW pitch setting. • ON : The displayed frequency shifts when the operating mode is changed between SSB and CW. • OFF : The displayed frequency does not shift. Selects the side band used to receive CW in CW normal mode. (default: LSB) Selects the desired band(s) for audio output from [MIC] connector (pin 8) from MAIN+SUB and SUB. (default: MAIN+SUB) • MAIN+SUB : Outputs both main and sub bands audio. • SUB : Outputs sub band audio only. Sets the external keypad for voice memory transmission capability ON and OFF. See page 2-6 for the equivalent circuit of an external keypad and connection. • ON : Pushing one of external keypad switches, transmits the desired voice memory contents during a phone mode operation. • OFF : External keypad does not function. (default) Sets the external keypad for keyer memory transmission capability ON and OFF. See page 2-6 for the equivalent circuit of an external keypad and connection. • ON : Pushing one of external keypad switches, transmits the desired keyer memory contents during CW mode operation. • OFF : External keypad does not function. (default) Sets the CI-V data transfer rate. 300, 1200, 4800, 9600, 19200 bps and "Auto" are available. (default: Auto) When "Auto" is selected, the baud rate is automatically set according to the data rate of connected controller. 12-19