Icom IC-7800 Instruction Manual - Page 58

4 RECEIVE AND TRANSMIT D Contest number set mode [F-1•Y] [F-2•Z][F-4•DEF] [EXIT/SET] Main dial • Contest number set mode screen This menu is used to set the contest (serial) number and count up trigger, etc. • Setting contents q During CW mode operation, push [F-3•KEYER] to select memory keyer screen. w Push [EXIT•SET] to select memory keyer menu, then push [F-3•001] to select contest serial number set mode. e Push [F-1•Y] or [F-2•Z] to select the desired set item. r Set the desired condition using the main dial. • Push [F-4•DEF] for 1 sec. to select the default condition or value. t Push [EXIT/SET] twice to normal screen. This item sets the numbering system used for contest (serial) numbers- normal or short morse numbers. • Normal : Does not use short morse numbers (default) • 190➔ANO : Sets 1 as A, 9 as N and 0 as O. • 190➔ANT : Sets 1 as A, 9 as N and 0 as T. • 90➔ NO : Sets 9 as N and 0 as O. • 90➔ NT : Sets 9 as N and 0 as T. This selects which of the four memories will contain the contest serial number exchange. The count-up trigger allows the serial number to automatically incremented after each complete serial number exchange is sent. • M1, M2, M3 and M4 can be set. (default: M2) This item shows the current number for the count-up trigger channel set above. • Rotate the main dial to change the number, or push [F-3•001CLR] for 1 sec. to reset the current number to 001. 4-10