Icom IC-7800 Instruction Manual - Page 72
DPSK memory transmission DAutomatic transmission/reception setting
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4 RECEIVE AND TRANSMIT D PSK memory transmission [F-1•PT1]-[F-4•PT4] [EXIT/SET] [F-7•1-4/5-8] [F-1•PT5]-[F-4•PT8] Pre-set characters can be sent using the PSK memory. Contents of the memory are set using the edit menu. q During PSK mode operation, push [F-3•DECODE] to select PSK decode screen. w Push [F-4•TX MEM] to select PSK memory screen. e Push [F-7•1-4/5-8] to select memory bank then push one of the function keys ([F-1•PT1] to [F-4•PT4] or [F-1•PT5] to [F-4•PT8]). • When no keyboard is connected, the selected memory contents will be transmitted immediately. • When a keyboard is connected, the memory contents will be transmitted immediately when function key is pushed, or transmitted after [F12] on the connected keyboard is pressed, depending on auto transmission/reception setting (see below). • The transmission date, time, reception date and/or time may be displayed in RX contents screen, depending on setting. D Automatic transmission/reception setting [F-6•AUTO TX] [EXIT/SET] [F-7•PT1..PT8] q During PSK mode operation, push [F-3•DECODE] to select PSK decode screen. w Push [F-4•TX MEM] to select PSK memory screen, then push [F-6•EDIT] to select PSK memory edit screen. • PSK memory contents of Channel 1 (PT1) is selected. e Push [F-7•PT1..PT8] several times to select the desired RTTY memory. r Push [F-6•AUTO TX] several times to select the desired condition, as follows. • AUTO TX/RX : Automatically transmits the selected memory and returns to receive after the transmission. • AUTO TX : Automatically transmits the selected memory. To return to receive, press [F12] on the keyboard. • AUTO RX : Press [F12] on the keyboard to transmit the selected memory. Automatically returns to receive after the transmission. • No indication : Press [F12] on the keyboard to transmit the selected memory and press [F12] again to return to receive. t Push [EXIT/SET] to return to exit from PSK memory edit condition. NOTE: The transceiver always functions as the "AUTO TX/RX" setting when no keyboard is connected. 4-24