Icom IC-7800 Instruction Manual - Page 183
Command table continued
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
14 CONTROL COMMAND D Command table (continued) Command Sub command Description 15 01 Read squelch condition 02 Read S-meter level 11 Read RF power meter 12 Read SWR meter 13 Read ALC meter 14 Read COMP meter 15 Read VD meter 16 Read ID meter 16 02 Preamp (0=OFF; 1=preamp 1; 2=preamp 2) 12 AGC selection (0=OFF; 1=Slow; 2=Mid; 3=Fast) 22 Noise blanker (0=OFF; 1=ON) 32 Audio peak filter (0=OFF; 1=320 Hz; 2=160 Hz; 3=80 Hz) 40 Noise reduction (0=OFF; 1=ON) 41 Auto notch (0=OFF; 1=ON) 42 Repeater tone (0=OFF; 1=ON) 43 Tone squelch (0=OFF; 1=ON) 44 Speech compressor (0=OFF; 1=ON) 45 Monitor (0=OFF; 1=ON) 46 VOX function (0=OFF; 1=ON) 47 Break-in (0=OFF; 1=semi break- in; 2=full break-in) 48 Manual notch (0=OFF; 1=ON) 4C VSC (0=OFF; 1=ON) 4D Manual AGC (0=OFF; 1=ON) 4E DIGI-SEL (0=OFF; 1=ON) 4F Twin peak filter (0=OFF; 1=ON) 50 Dial lock (0=OFF; 1=ON) 19 00 Read the transceiver ID 1A 00 Send/read memory contents (see p. 14-9 for details) 01 Send/read band stacking register contents (see p. 14-9 for details) 02 Send/read memory keyer con- tents (see p. 14-9 for details) 03 Send/read the selected filter width (SSB, CW, PSK: 0=50 Hz to 40=3600 Hz; RTTY: 0=50 Hz to 31=2700 Hz; AM: 0=200 Hz to 49=10 kHz) 04 Send/read the selected AGC time constant (0=OFF, 1=0.1/0.3 sec. to 13=6.0/8.0 sec.) 050001 Send/read SSB TX Tone (Bass) level (0 =-5 to 10=+5) 050002 Send/read SSB TX Tone (Treble) level (0=-5 to 10=+5) 050003 Send/read SSB RX Tone (Bass) level (0 =-5 to 10=+5) 050004 Send/read SSB RX Tone (Treble) 050005 level (0=-5 to 10=+5) Send/read AM TX Tone (Bass) level (0 =-5 to 10=+5) 050006 Send/read AM TX Tone (Treble) level (0=-5 to 10=+5) 050007 Send/read AM RX Tone (Bass) level (0 =-5 to 10=+5) 050008 Send/read AM RX Tone (Treble) level (0=-5 to 10=+5) 050009 Send/read FM TX Tone (Bass) 050010 level (0 =-5 to 10=+5) Send/read FM TX Tone (Treble) level (0=-5 to 10=+5) Command 1A Sub command Description 050011 050012 050013 050014 050015 050016 050017 050018 050019 050020 050021 050022 050023 050024 050025 050026 050027 050028 050029 050030 050031 050032 050033 050034 Send/read FM RX Tone (Bass) level (0 =-5 to 10=+5) Send/read FM RX Tone (Treble) level (0=-5 to 10=+5) Send/read SSB TX bandwidth for wide (see p. 14-10 for details) Send/read SSB TX bandwidth for mid. (see p. 14-10 for details) Send/read SSB TX bandwidth for narrow (see p. 14-10 for details) Send/read speech level (0=0% to 255=100%) Send/read CW side tone gain (0=min. to 255=max.) Send/read CW side tone gain limit (0=OFF, 1=ON) Send/read beep gain (0=min. to 255=max.) Send/read beep gain limit (0=OFF, 1=ON) Send/read headphones output ratio (0=0.60 to 255=1.40) Send/read headphone output selection (0=separated, 1=mixed) Send/read AF/SQL signal output to ACC-A (0=Main; 1=Sub) Send/read AF/SQL signal output to ACC-B (0=Main; 1=Sub) Send/read AF output level to ACC-A (0=0% to 255=100%) Send/read AF output level to ACC-B (0=0% to 255=100%) Send/read S/P DIF output level (0=0% to 255=100%) Send/read MOD output level to ACC-A (0=0% to 255=100%) Send/read MOD output level to ACC-B (0=0% to 255=100%) Send/read S/P DIF MOD output level (0=0% to 255=100%) Send/read MOD input connector during DATA OFF (0=MIC; 1=ACC-A; 2=ACC-B; 3=MIC/ACC-A; 4=MIC/ACC-B; 5=ACC-A/ACC-B; 6=MIC/ACCA/ACC-B; 7=S/P DIF) Send/read MOD input connector during DATA1 (0=MIC; 1=ACC-A; 2=ACC-B; 3=MIC/ACC-A; 4=MIC/ACC-B; 5=ACC-A/ACC-B; 6=MIC/ACCA/ACC-B; 7=S/P DIF) Send/read MOD input connector during DATA2 (0=MIC; 1=ACC-A; 2=ACC-B; 3=MIC/ACC-A; 4=MIC/ACC-B; 5=ACC-A/ACC-B; 6=MIC/ACCA/ACC-B; 7=S/P DIF) Send/read MOD input connector during DATA3 (0=MIC; 1=ACC-A; 2=ACC-B; 3=MIC/ACC-A; 4=MIC/ACC-B; 5=ACC-A/ACC-B; 6=MIC/ACCA/ACC-B; 7=S/P DIF) 14-4