Icom IC-7800 Instruction Manual - Page 151
Set Mode
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
12 SET MODE I ACC set mode (continued) Selects the desired connector(s) for modulation input when data 2 mode (D2) is in use. • MIC : Use the signals from [MIC]. • ACC-A : Use the signals from [ACC1-A] (pin 4). • ACC-B : Use the signals from [ACC1-B] (pin 4). (default) • MIC,ACC-A : Use the signals from [MIC] and [ACC1-A] (pin 4). • MIC,ACC-B : Use the signals from [MIC] and [ACC1-B] (pin 4). • ACC-A,ACC-B : Use the signals from [ACC1-A] and [ACC1-B] (pin 4). • MIC,ACC-A,ACC-B : Use the signals from [MIC], [ACC1-A] and [ACC1-B] (pin 4). • S/P DIF : Use the signals from [S/P DIF]. Selects the desired connector(s) for modulation input when data 3 mode (D3) is in use. • MIC : Use the signals from [MIC]. • ACC-A : Use the signals from [ACC1-A] (pin 4). • ACC-B : Use the signals from [ACC1-B] (pin 4). • MIC,ACC-A : Use the signals from [MIC] and [ACC1-A] (pin 4). • MIC,ACC-B : Use the signals from [MIC] and [ACC1-B] (pin 4). • ACC-A,ACC-B : Use the signals from [ACC1-A] and [ACC1-B] (pin 4). (default) • MIC,ACC-A,ACC-B : Use the signals from [MIC], [ACC1-A] and [ACC1-B] (pin 4). • S/P DIF : Use the signals from [S/P DIF]. Selects the desired band for the operating frequency band control signal output from [ACC2-A] (pin 4). • MAIN : Outputs the band signal displayed in main readout. • SUB : Outputs the band signal displayed in sub readout. • TX : Outputs the band signal, that can be transmitted. (default) Selects the desired band for the operating frequency band control signal output from [ACC2-B] (pin 4). • MAIN : Outputs the band signal displayed in main readout. • SUB : Outputs the band signal displayed in sub readout. • TX : Outputs the band signal, that can be transmitted. (default) 12-8