Icom IC-7800 Instruction Manual - Page 152
V DC/0.5 A max.; default
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
SET MODE 12 I ACC set mode (continued) Selects the switching relay type for [RELAY] from Lead and MOS-FET. Select the suitable relay type when connecting a nonIcom linear amplifier. • Lead : Use mechanical relay. (16 V DC/0.5 A max.; default) • MOS-FET : Use semiconductor type relay. (250 V/200 mA max.) Selects the desired item for an external meter indication (main readout). • Auto : Outputs the receiving signal strength level during receive, and outputs the selected level (selected with [METER]), during transmit. (default) • S(MAIN) : Outputs the receiving signal strength level during receive. • Po : Outputs the transmitting power level dur- ing transmit. • SWR : Outputs the VSWR level during transmit. • ALC : Outputs the ALC level during transmit. • COMP : Outputs the compression level during transmit. • VD : Outputs the drain terminal voltage of the final amplifier MOS-FETs. • ID : Outputs the drain current of the final am- plifier MOS-FETs. Selects the desired item for an external meter indication (sub readout). • Auto : Outputs the receiving signal strength level during receive, and outputs the selected level (selected with [METER]), during transmit. (default) • S(MAIN) : Outputs the receiving signal strength level during receive. • Po : Outputs the transmitting power level dur- ing transmit. • SWR : Outputs the VSWR level during transmit. • ALC : Outputs the ALC level during transmit. • COMP : Outputs the compression level during transmit. • VD : Outputs the drain terminal voltage of the final amplifier MOS-FETs. • ID : Outputs the drain current of the final am- plifier MOS-FETs. Sets the output level for an external meter indication (main readout) with in 0 to 100% range in 1% steps. • Approx. 2.5 V at 50% (default) setting for full-scale indication. (4.7 kΩ impedance) Sets the output level for an external meter indication (sub readout) with in 0 to 100% range in 1% steps. • Approx. 2.5 V at 50% (default) setting for full-scale indication. (4.7 kΩ impedance) 12-9