Icom IC-7800 Instruction Manual - Page 161

12 SET MODE I Miscellaneous (Others) set mode (continued) Sets the rate at which frequencies are scanned when the microphone [UP]/[DN] switches are pushed and held. High or low can be selected. • HIGH : High speed (default; 50 tuning steps/sec.) • LOW : Low speed (25 tuning steps/sec.) Selects the RIT/∂TX frequency clearing instruction with the [CLEAR] switch. • ON : Clears the RIT/∂TX frequency when [CLEAR] is pushed momentarily. • OFF : Clears the RIT/∂TX frequency when [CLEAR] is pushed for 1 sec. (default) Selects notch functions for SSB mode operation from Auto, Manual and Auto/Manual. • Auto : The auto notch can only be used. • Manual : The manual notch can only be used. • Auto/Manual : Both the auto and manual notch can be used. (default) Selects notch functions for AM mode operation from Auto, Manual and Auto/Manual. • Auto : The auto notch can only be used. • Manual : The manual notch can only be used. • Auto/Manual : Both the auto and manual notch can be used. (default) Selects [DIGI-SEL] control function from DIGI-SEL and APF. • DIGI-SEL : [DIGI-SEL] control functions as the digi- tal selector operation. (default) • APF : [DIGI-SEL] control functions as the audio peak filter adjustment. Selects filter set screen indication condition from Fix and Auto (by FILTER,PBT Operation). • Fix : When filter screen accessed with the main band's [FILTER] switch, the screen shows main band's filter width and PBT conditions only; when filter set screen accessed with the sub band's [FILTER] switch, the screen shows sub band's filter width and PBT conditions only. • Auto (by FILTER,PBT Operation) : Filter set screen indication can be switched between main and sub bands filter width and PBT conditions when either band's [FILTER] switch or [TWIN PBT] control is operated. (default) 12-18