Icom IC-7800 Instruction Manual - Page 47

3 BASIC OPERATIONS I Basic transmit operation D Transmitting [RF PWR] [TX] indicator [TRANSMIT] D Microphone gain adjustment [MIC] [METER] ALC zone 5 9 +20 +40 1 +60dB 5 10 S 0 ID PO 0 10 SWR 10 COMP 50 1.5102 ALC ∞ 100 150 3 20 200 15 250 W A dB 44 52V VD Before transmitting, monitor your selected operating frequency to make sure transmitting won't cause interference to other stations on the same frequency. It's good amateur practice to listen first, and then, even if nothing is heard, ask "is the frequency in use" once or twice, before you being operating on that frequency. Before transmitting, monitor your selected operating frequency to make sure transmitting won't cause interference to other stations on the same frequency. q Push [TRANSMIT] or [PTT] (microphone) to transmit. • The main band's [TX] indicator lights red. • When split operation is activated, the sub band's [TX] indicator lights. w Push [TRANSMIT] again or release [PTT] (microphone) to return to receive. ✔ Adjusting the transmit output power ➥ Rotate [RF PWR]. • Adjustable range : 5 W to 200 W (AM mode: 5 W to 50 W) Decreases min. 5 W Increases max. 200 W (50 W for AM) Before transmitting, monitor your selected operating frequency to make sure transmitting won't cause interference to other stations on the same frequency. q Push [METER] to select the ALC meter. w Push [PTT] (microphone) to transmit. • Talk into the microphone at your normal voice level. e While talking into the microphone, rotate [MIC] so that the ALC meter reading doesn't go outside the ALC zone. (see at left) r Release [PTT] (microphone) to return to receive. 3-12