Icom IC-7800 Instruction Manual - Page 154

I Display set mode Adjusts the LCD unit brightness from 0 (dark) to 100% (bright) range in 1% steps. (default: 50%) SET MODE 12 Adjusts the switch indicators brightness from 1 (dark) to 100 (bright) range in 1 steps. (default: 80) Selects the desired display type from A, B and C. (default: A) Selects the desired font for frequency readout from Italic (1), Italic (2), Italic (3), Italic (4), Round (1), Round (2), Round (3), Shadow (1), Shadow (2), Shadow (3), Qubic (1), Qubic (2), Qubic (3), Qubic (4), IC-780 (1), IC-780 (2), IC-780 (3) and IC-780 (4). (default: Italic (1)) Selects the desired font for the displays other than frequency readout from Normal and Slim. (default: Normal) Set meter needle response from SLOW, MID and FAST. (default: MID) This setting is effective for the standard and edgewise meter type selections only. Selects the desired S/RF meter type during normal screen indication from Standard, Edgewise and Bar. (default: Standard) Selects the desired S/RF meter type during wide screen or mini scope indication from Edgewise and Bar. (default: Edgewise) Turns the meter peak hold function ON and OFF. (default: ON) This function is used for the bar meter only. 12-11