Konica Minolta C83hc High Chroma IC-307 User Guide - Page 140

130 Parameter Chapter 11-Job parameters Option Emulate source paper tint Description Emulates the original paper tint if the tint is included in the profile. Notes: ● If you select Emulate source paper tint, you cannot select Preserve pure CMY colors. ● If the job is simplex, only the front side will be printed using the tint emulation. ● If you select Emulate source paper tint, Absolute is used as the rendering intent. Black Point Compensation CMYK device link RGB source profile RGB rendering intent Activates the Black Point Compensation algorithm, which extends the gray axis of a profile and increases detail in the darkest color areas. Enables you to select a CMYK device link profile. Enables you to select an RGB source profile. Provides the following options (for information on each option, see the descriptions of the CMYK rendering intent options in this table): ● Auto ● Relative ● Absolute ● Saturation ● Perceptual Apply CMYK emulation To convert RGB elements according to the selected CMYK emulation method, select the Apply CMYK emulation. The RGB elements receive the same look as the CMYK elements, creating a unified appearance. RGB device link Enables you to select an RGB device link source profile. Destination Profile Provides the following options: ● Linked-Uses the destination profile that was linked using the Media and Color Manager in the Resource Center ● 80 PPM Press or 70_60 PPM Press -Uses the predefined destination profile that is most suitable for the press