Konica Minolta C83hc High Chroma IC-307 User Guide - Page 149

Exceptions tab in the job parameters window 139 Parameter Slip sheet Image position Option Slip sheets between copies Same on both sides Rear Lead Center Description Prints slip sheets with your job. If a job is collated, the slip sheets are printed between sets. If a job is not collated, the slip sheets are printed between groups. ● Tray: The tray in which the specified media type is loaded. ● Frequency: Enables you to set the number of slip sheets that you want to print. The default is set to 1. Shifts the image on the sheet's second side (face down image) according to the shift on the sheet's first side (face up image) Enables you to define the sheet's edge near the rear of the printer, where the printing stops. The edge of a sheet where printing begins. Tip: Use this option to move duplex page data away from the spine. Prints your job in the center of the page. Exceptions tab in the job parameters window Parameter Exceptions Add and delete page exceptions and inserts Option Type Description Define the type of exception for your job. Provides the following options: ● Page range-Type the range of pages for the exception. ● Front cover or Back cover-Select Duplex to print the first two (or last two) pages of the job as the cover page (back cover). Note: If the imposition type is Saddle Stitch, select Cover to print both a front and back cover page on a different media type. Select Middle sheet to print the internal sheet on a different media type. ● Inserts: Select Before or After and type the page number that will precede or follow the insert. Then, in the Quantity box, type the total number of inserts you want to add. Tray The tray in which the media is loaded.