Konica Minolta C83hc High Chroma IC-307 User Guide - Page 67
Calibration table Info Data tab, The parameters that were selected when
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Calibration table Info Data tab 57 Calibration table Info Data tab This tab includes the following: ● Output Density Measured The values that are measured from the printed target. Target The maximum accepted values of the output density. Notes: ○ The target values are set higher than the expected values of the output density. Measured values do not need to match the target values. Measured values will be lower than the target values . ○ For the target value, the measured value is displayed instead of the real target value if the calibration look-up table is generated by off-the-glass-calibration. ○ For the target curve, the virtual target curve is displayed instead of the real target curve if the calibration look-up table is generated by off-the-glass-calibration. Minimum Accepted The minimum measured value of the output density that is accepted for correction. ● Properties-The parameters that were selected when the calibration table was created.