Konica Minolta C83hc High Chroma IC-307 User Guide - Page 28
Performing off-the-glass calibration from the Creo Color Server, Requirements
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
18 Chapter 3-Calibration Performing off-the-glass calibration from the Creo Color Server Requirements: ● Make sure that the Calibration is done off-the-glass option is selected in the Preferences window. ● Print at least 25 copies of any file to warm up the printer. Calibrate both the printer and scanner at the same time. If you place only the print chart on the platen, the printer is calibrated. If you place only the scanner chart on the platen, the scanner is calibrated. 1. From the Tools menu, select Calibration. 2. In the Tray list, select the desired tray. The default tray is Tray 1. 3. In the Media Type list, select the desired media type-for example, Gloss Coated for Laser.You can print the calibration chart on any paper size that is equal to or larger than A4 or Letter. 4. In the Screening list, select the screening method. 5. In the Number of copies box, enter the number of copies you want to print. Note: It is recommended that you print at least 25 copies of the calibration chart, and then use one of the last copies printed. 6. (Optional) Select the Engine Calibration check box to perform an internal printer calibration in addition to the color calibration. If you select the Engine Calibration check box, the internal printer calibration will be performed first, and then the color calibration will start.