Lenovo ThinkPad X1 (English) User Guide - Page 153
Audio problems, Conexant 20672 SmartAudio HD
View all Lenovo ThinkPad X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
11. Click OK to apply the changes. Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors. • Problem: Display switching does not work. Solution: If you use the Extend desktop function, disable it, and change the display output location. If a DVD movie or a video clip is playing, stop the playback, close the application, and then change the display output location. • Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh rate on the secondary display. Solution: Change the resolution depth to lower settings for the primary display. Refer to the "Solution" for "The Extend desktop function does not work" above. • Problem: The screen position on the external monitor is incorrect when that monitor is set for a high resolution. Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or right on the screen. To correct this, first make sure that your external monitor supports the display mode, that is, the resolution and the refresh rate, that you have set. If it does not, set a display mode that the monitor supports. If it does support the display mode you have set, go to the setup menu for the monitor itself and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For details, see the reference manual for the monitor. Audio problems • Problem: Wave or MIDI sound does not play correctly. Solution: Make sure the built-in audio device is configured correctly. 1. Click Start ➙ Control Panel. 2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. Double-click Sound, video and game controllers. 5. Make sure the following device is enabled and configured correctly: - Conexant 20672 SmartAudio HD • Problem: Recordings made by using the Microphone input are not loud enough. Solution: Make sure that Microphone Boost is turned on and set as follows: 1. Click Start ➙ Control Panel. 2. Click Hardware and Sound 3. Click Sound. 4. Click the Recording tab in the Sound window. 5. Select Microphone, and click the Properties button. 6. Click the Levels tab, and move the Microphone Boost slider upwards. 7. Click OK. Note: For details about controlling volume, refer to your Windows online help. • Problem: A volume or balance slider cannot be moved. Chapter 10. Troubleshooting computer problems 137