Mackie DL806 Reference Guide - Page 79

Mackie DL806 and DL1608 Reference Guide Zeroing the GEQ Imagine how long it might take to reset each of the 31 bands on the graphic EQ to ±0 dB. The factory default preset for graphic EQ will do that for you in a few easy steps. First, you should already be on the graphics EQ view; if you're reading this chapter, I gather that you're already there! Now (1) tap the presets button in the upper-right corner of the iPad, (2) once there, make sure the "GEQ" button (not the "Output" button) is green, then (3) tap the factory default button, (4) tap recall, and (5) tap the yes button. Done! A lot more information about presets starts on page 104. Graphic EQ at a Glance Parameter GEQ ENABLE 20 Hz Gain 25 Hz Gain 31.5 Hz Gain 40 Hz Gain 50 Hz Gain 63 Hz Gain 80 Hz Gain 100 Hz Gain 125 Hz Gain 160 Hz Gain 200 Hz Gain 250 Hz Gain 315 Hz Gain 400 Hz Gain 500 Hz Gain 630 Hz Gain 800 Hz Gain 1 kHz Gain 1.25 kHz Gain 1.6 kHz Gain 2 kHz Gain 2.5 kHz Gain 3.15 kHz Gain 4 kHz Gain 5 kHz Gain 6.3 kHz Gain 8 kHz Gain 10 kHz Gain 12.5 kHz Gain 16 kHz Gain 20 kHz Gain Master Low Value OFF -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB -12 dB High Value ON 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB 12 dB Default OFF 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 79