Mackie DL806 Reference Guide - Page 87
Wired II, Wireless - setup
View all Mackie DL806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Mackie DL806 and DL1608 Reference Guide Wired II - If you connect the Wi-Fi router, power cycle the console [remember that the console needs to be powered on AFTER the router] and connect the iPad to the wireless network as described in chapter 4 ["Mixer Hardware : Wireless Setup", pages 24-27], you will see the DL Series mixer appear in the wireless section available for wireless control. This may take a few moments to appear. Again, though, since the iPad is wired, you will be unable to change over to wireless control. Try to select the wireless DL Series mixer by tapping it. Notice that it just bounces back to the wired device. This is indicated by a grayed out DL806 or DL1608 icon in the wireless selection. However, the offline icon is not grayed out, indicating that it is available for selection. You might decide to work offline so your changes don't affect the mix of the gig currently taking place. Wireless - Remove the iPad from the mixer and select the DL Series mixer from the wireless list so it highlights blue. Feel free to wander the venue and mix with this wireless iPad. Because the iPad is wireless, working wired is not an option until the iPad is reattached to the mixer. As such, the DL806 or DL1608 icon in the wired list is grayed out. However, the offline selection is not grayed out, indicating that it is available for selection. You might decide to work offline so your changes don't affect the mix of the gig currently taking place. 87