Netgear FS728TPv2 FS728TP Software Administration Manual - Page 150
Security, Management Security, TACACS, Server Configuration, TACACS+ Server, Apply, Server Address
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
FS728TP Smart Switch Software Administration Manual To display the TACACS+ Server Configuration page, click Security Management Security, and then click the TACACS+ Server Configuration link. To configure TACACS+ server settings: 1. To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the IP address of the server to add, and click Apply. Note: The Add option is available if fewer than five TACACS+ servers are configured on the system, and the Server Address field is only available when Add is selected in the TACACS+ Server IP Address field. After you add one or more TACACS+ servers, additional fields appear on the TACACS+ Server Configuration page. 2. In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority. 3. In the Port field, specify the authentication port number through which the TACACS+ session occurs. The default is port 49, and the range is 0-65535. 4. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the FS728TP and the TACACS+ server. This key must match the encryption used on the TACACS+ server. The valid range is 0-128 characters. 150 | Chapter 5: Managing Device Security