Netgear FS728TPv2 FS728TP Software Administration Manual - Page 158
Access Rule Configuration, Refresh, Security, Access, Access Control
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
FS728TP Smart Switch Software Administration Manual The Profile Summary table shows the rules that are configured for the profile, as the following table describes. Field Description Rule Type Identifies the action the rule takes, which is either Permit or Deny. Service Type Displays the type of service to allow or prohibit from accessing the switch management interface: • SNMP • HTTP • HTTPS Source IP Address Displays the IP Address of the client that may or may not originate management traffic. Mask Displays the subnet mask associated with the IP address. Priority Displays the priority of the rule. The rules are validated against the incoming management request in the ascending order of their priorities. If a rule matches, action is performed and subsequent rules below are ignored. Click Refresh to update the page with the most current information. Access Rule Configuration Use the Access Rule Configuration page to configure the rules about what systems can access the FS728TP Web interface and what protocols are allowed. To access the Access Rule Configuration page, click Security Access, and then click the Access Control Access Rule Configuration link. 158 | Chapter 5: Managing Device Security