Netgear FS728TPv2 FS728TP Software Administration Manual - Page 71
Interface Configuration, System, Services, Filtering, PORTS, Enable, Disable, Apply, Cancel
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
FS728TP Smart Switch Software Administration Manual Interface Configuration Use the DHCP Filtering Interface Configuration page to view and configure each port as a trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a port is configured as untrusted, any DHCP (or BootP) responses received on that port are discarded. To access the DHCP Filtering Interface Configuration page, click System Services DHCP Filtering Interface Configuration. To configure DHCP filtering settings for an interface: 1. To configure DHCP filtering settings for a physical port, click PORTS. 2. To configure DHCP filtering settings for a Link Aggregation Group (LAG), click LAGS. 3. To configure DHCP filtering settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 5. Choose the trust mode for the selected port(s) or LAG(s). • Enable: Any DHCP responses received on this port are forwarded. • Disable: Any DHCP (or BootP) responses received on this port are discarded. 6. Click Apply to apply the change to the system. Configuration changes take effect immediately. 7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Chapter 2: Configuring System Information | 71