Netgear FS728TPv2 FS728TP Software Administration Manual - Page 151
Authentication List Configuration, Connection Timeout, Apply, TACACS, Server, Delete, admin, Security
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
FS728TP Smart Switch Software Administration Manual 5. In the Connection Timeout field, specify the amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is from 1 to 30 seconds. 6. If you make changes to the page, or add a new entry, click Apply to apply the changes to the system. 7. To delete a configured TACACS+ server, select the IP address of the server from the TACACS+ Server drop down menu, and then click Delete. Authentication List Configuration Use the Authentication List page to configure the default login list. A login list specifies one or more authentication methods to validate switch or port access for the admin user. Note: Admin is the only user on the system and is assigned to a preconfigured list named defaultList, which you cannot delete. To access the Authentication List page, click Security Management Security, and then click the Authentication List link. To change the authentication method for the defaultList: 1. Select the check box next to the defaultList name 2. Use the drop down menu in the 1 column to select the authentication method that should appear first in the selected authentication login list. If you select a method that does not time out as the first method, such as 'local', no other method will be tried, even if you have specified more than one method. This parameter will not appear when you first create a new login list. User authentication occurs in the order the methods are selected. Possible methods are as follows: Chapter 5: Managing Device Security | 151