Netgear FS728TPv2 FS728TP Software Administration Manual - Page 224
Dual Image Status, Delete, Image, Cancel, Apply, Maintenance > File Management, Dual Image
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
FS728TP Smart Switch Software Administration Manual Note: After activating an image, you must perform a system reset of the switch in order to run the new code. 4. To remove the selected image from permanent storage on the switch, select the Delete Image check box. You cannot delete the active image. 5. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest value of the switch. 6. Click Apply to apply the settings to the switch. Dual Image Status You can use the Dual Image Status page to view information about the system images on the device. To display the Dual Image Status page, click Maintenance > File Management Dual Image Dual Image Status. The following table describes the information on the Dual Image Status page. Field Unit Image1 Ver Image2 Ver Description The unit ID of the switch is always 1. Displays the version of the image1 code file. Displays the version of the image2 code file. 224 | Chapter 7: Maintenance