Netgear FS728TPv2 FS728TP Software Administration Manual - Page 56
System, SNMP V1/V2, Trap Flags, Authentication, Link Up/Down, Spanning Tree, Apply, Cancel
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
FS728TP Smart Switch Software Administration Manual To access the Trap Flags page, click System SNMP SNMP V1/V2 Trap Flags. To configure the trap flags: 1. From the Authentication field, enable or disable activation of authentication failure traps by selecting the corresponding button. The factory default is Enable. 2. From the Link Up/Down field, enable or disable activation of link status traps by selecting the corresponding button. The factory default is Enable. 3. From the Spanning Tree field, enable or disable activation of spanning tree traps by selecting the corresponding button. The factory default is Enable. 4. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 56 | Chapter 2: Configuring System Information