Netgear FS728TPv2 FS728TP Software Administration Manual - Page 95
CST Port Configuration, Cancel, Apply, Refresh, Switching > STP >, Advanced, PORTS
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
FS728TP Smart Switch Software Administration Manual 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch 3. If you make any configuration changes, click Apply to send the updated configuration to the switch. Configuration changes take place immediately. The following table describes the MSTP status information displayed on the Spanning Tree CST Configuration page. Field MST ID VID FID Description Table consisting of the MST instances (including the CST) and the corresponding VLAN IDs associated with each of them. Table consisting of the VLAN IDs and the corresponding FID associated with each of them Table consisting of the FIDs and the corresponding VLAN IDs associated with each of them. Click Refresh to update the information on the screen with the most current data. CST Port Configuration Use the Spanning Tree CST Port Configuration page to configure Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on the switch. To display the Spanning Tree CST Port Configuration page, click Switching > STP > Advanced CST Port Configuration. To configure CST port settings: 1. To configure CST settings for a physical port, click PORTS. 2. To configure CST settings for a Link Aggregation Group (LAG), click LAGS. Chapter 3: Configuring Switching Information | 95