Netgear FS728TPv2 FS728TP Software Administration Manual - Page 79
LAG ID, LAG Name, Cancel, Apply, Current Members, Configuring Switching Information
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
FS728TP Smart Switch Software Administration Manual To configure LAG members: 1. From the LAG ID field, select the LAG to which to assign ports. 2. Optionally, in the LAG Name field, enter the name you want assigned to the LAG. You may enter any string of up to 15 alphanumeric characters. 3. Specify whether to enable or disable the following: 4. Click the orange bar to display the ports. 5. Click the box below each port to include in the LAG. The following figure shows an example of how to configure LAG1 with ports e1-e4 as members. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 8. To view the ports that are members of the selected LAG, click Current Members. Chapter 3: Configuring Switching Information | 79