Netgear FS728TPv2 FS728TP Software Administration Manual - Page 41
Auto-DoS Configuration, Service > Auto-DoS Configuration
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
FS728TP Smart Switch Software Administration Manual Auto-DoS Configuration The Auto-DoS Configuration page lets you automatically enable all the DoS features available on the switch, except for the L4 Port attack. See the previous section for information about the types of DoS attacks the switch can monitor and block. To access the Auto-DoS Configuration page, click System Management Denial of Service > Auto-DoS Configuration. To configure the Auto-DoS feature: 1. Select a radio button to enable or disable Auto-DoS: • Disable. Auto-DoS is disabled (default). • Enable. Auto-DoS is enabled. 2. Click Apply to send the updated configuration to the switch. Configuration changes occur immediately. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. DoS Configuration The DoS Configuration page lets you to select which types of DoS attacks for the switch to monitor and block. To access the DoS Configuration page, click System Management Denial of Service > DoS Configuration. Chapter 2: Configuring System Information | 41