Netgear FS728TPv2 FS728TP Software Administration Manual - Page 43
DNS, DNS Configuration
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
FS728TP Smart Switch Software Administration Manual • Denial of Service L4 Port. Enable or disable this option by selecting the appropriate radio button. Enabling L4 Port DoS prevention causes the switch to drop packets that have TCP/UDP source port equal to TCP/UDP destination port. The factory default is Disable. • Denial of Service ICMP. Enable or disable this option by selecting the appropriate radio button. Enabling ICMP DoS prevention causes the switch to drop ICMP packets that have a type set to ECHO_REQ (ping) and a size greater than the configured ICMP packet size. The factory default is Disable. • Denial of Service Max ICMP Size. Specify the Max ICMP packet size allowed. If ICMP DoS prevention is enabled, the switch will drop ICMP ping packets that have a size greater then this configured Max ICMP packet size. The factory default is 512 bytes. 2. If you change any of the DoS settings, click Apply to apply the changes to the switch. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. DNS You can use these pages to configure information about DNS servers the network uses and how the switch operates as a DNS client. DNS Configuration Use this page to configure global DNS settings and DNS server information. To access this page, click System Management DNS DNS Configuration. Chapter 2: Configuring System Information | 43