Netgear FS728TPv2 FS728TP Software Administration Manual - Page 164
Protocol Version, PAE Capabilities, Authenticator PAE State, Backend State, EAPOL Flood Mode, Apply
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
FS728TP Smart Switch Software Administration Manual exerts control over communication in both directions (disabling both incoming and outgoing frames). This field is not configurable. • Protocol Version. This field displays the protocol version associated with the selected port. The only possible value is 1, corresponding to the first version of the 802.1X specification. This field is not configurable. • PAE Capabilities. This field displays the port access entity (PAE) functionality of the selected port. Possible values are Authenticator or Supplicant. This field is not configurable. • Authenticator PAE State. This field displays the current state of the authenticator PAE state machine. Possible values are as follows: • Initialize • Disconnected • Connecting • Authenticating • Authenticated • Aborting • Held • ForceAuthorized • ForceUnauthorized • Backend State. This field displays the current state of the backend authentication state machine. Possible values are as follows: • Request • Response • Success • Fail • Timeout • Initialize • Idle • EAPOL Flood Mode. This field is used to enable or disable the EAPOL Flood mode per Interface.The default value is Disable. 3. Click Apply to send the updated screen to the switch and cause the changes to occur on the switch and the changes will be saved. 4. Click Initialize to begin the initialization sequence on the selected port(s). This button is only selectable if the control mode is auto. If the button is not selectable, it will be grayed out. When this button is clicked, the action is immediate. It is not required to click Apply for the action to occur. 5. Click Reauthenticate to begin the reauthentication sequence on the selected port. This button is only selectable if the control mode is auto. If the button is not selectable, it will be grayed out. When this button is pressed, the action is immediate. It is not required to click Apply for the action to occur. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 164 | Chapter 5: Managing Device Security