Netgear GS724AT GS724AT Reference Manual - Page 117
Rapid STP, The Rapid STP screen displays
UPC - 606449056907
View all Netgear GS724AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
GS700AT Series Smart Switch Software Administration Manual 3. Enter the Path Cost in the provided field. 4. Select the Priority from the list in the provided field. 5. Click Apply to update the device. Rapid STP While Classic STP prevents forwarding loops in a general network topology, convergence can take between 30-60 seconds. This time may delay detecting possible loops and propagating status topology changes. Rapid Spanning Tree Protocol (RSTP) detects and uses network topologies that allow a faster STP convergence without creating forwarding loops. The Global System LAG information displays the same field information as the ports, but represents the LAG RSTP information. To define RSTP on the device: 1. Click Switching > STP > Advanced > RSTP. The Rapid STP screen displays: Figure 4-24 The Rapid STP screen contains the following fields: • Interface - Displays the port or LAG on which Rapid STP is enabled. 4-36 v1.0, March 2008 Configuring Switching Settings