Netgear GS724AT GS724AT Reference Manual - Page 20
NIC Setting on the Host that Accesses the GS700AT Gigabit Smart Switch, Web Access - ip address
UPC - 606449056907
View all Netgear GS724AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
GS700AT Series Smart Switch Software Administration Manual NIC Setting on the Host that Accesses the GS700AT Gigabit Smart Switch The settings of your Network Interface Card (NIC) under MS Windows OS are made with entries into Windows screens similar to the ones shown below. For comparison, the settings screens of the switch are also shown although they do not appear in the Windows view. Figure 1-4 You need Windows Administrator privileges to change these settings. 1. On your PC, access the MS Windows operating system TCP/IP Properties. 2. Set IP address and subnet mask appropriately. The subnet mask value is identical to that set in the switch. The PC IP address must be different from that of the switch but lie in the same subnet. 3. Click Web Access in the SmartWizard Discovery utility to enable the management screens as described in the following section. Getting Started with Switch Management 1-7 v1.0, March 2008