Netgear GS724AT GS724AT Reference Manual - Page 63
System > LLDP > Basic, LLDP Configuration, LLDP Properties, LLDPDU Handling
UPC - 606449056907
View all Netgear GS724AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
GS700AT Series Smart Switch Software Administration Manual To configure LLDP settings: 1. Click System > LLDP > Basic > LLDP Configuration. The Basic LLDP Configuration screen displays: Figure 3-18 The Basic LLDP Configuration screen contains the following fields: LLDP Properties • LLDP - Select the LLDP global status on the device. The possible field values are: - Disable - Disable LLDP on the device. This is the default value. - Enable - Enable LLDP on the device. • LLDPDU Handling - Select LLDPDU (LLDP Data Unit) packet handling when LLDP is disabled. The possible field values are: - Flooding - LLDPDU packets are flooded to all ports in the system. - Filtering - LLDPDU packets are filtered. This is the default. • TLV Advertised Interval - Enter the rate in seconds at which LLDP advertisement updates are sent. The possible field range is 5 - 32768 seconds. The default value is 30 seconds. • Hold Multiplier - Enter the amount of time that LLDP packets are held before the packets are discarded, measured in multiples of the TLV Advertised Interval. The possible field range is 2 - 10. The field default is 4. For example, if the TLV Advertised Interval is 30 seconds and the Hold Multiplier is 4, then the LLDP packets are discarded after 120 seconds. 3-28 v1.0, March 2008 Managing System Settings