Netgear GS724AT GS724AT Reference Manual - Page 19
Configuration Setting, Disable, want different values, enter the switch IP address - default ip
UPC - 606449056907
View all Netgear GS724AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
GS700AT Series Smart Switch Software Administration Manual 6. Click Configuration Setting. A screen similar to that shown below appears. Figure 1-3 7. Select Disable to disable DHCP. 8. The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you want different values, enter the switch IP address, gateway IP address and subnet mask. 9. Type your password and click Set. Please ensure that your PC and the GS700AT Gigabit Smart Switch are in the same subnet. Note the settings for later use. 1-6 Getting Started with Switch Management v1.0, March 2008
GS700AT Series Smart Switch Software Administration Manual
1-6
Getting Started with Switch Management
v1.0, March 2008
6.
Click
Configuration Setting
. A screen similar to that shown below appears.
7.
Select
Disable
to disable DHCP.
8.
The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you
want different values, enter the switch IP address, gateway IP address and subnet mask.
9.
Type your password and click
Set
. Please ensure that your PC and the GS700AT Gigabit
Smart Switch are in the same subnet. Note the settings for later use.
Figure 1-3