Netgear GS724AT GS724AT Reference Manual - Page 137
QoS > CoS > Basic > CoS Interface Configuration, Interface, Default CoS, Restore Defaults
UPC - 606449056907
View all Netgear GS724AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
GS700AT Series Smart Switch Software Administration Manual To configure CoS interface parameters: 1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration screen displays: Figure 5-2 The CoS Interface Configuration screen contains the following: • Interface - Displays the interface for which the default CoS parameters are defined. • Default CoS - Select the default CoS value for incoming packets to the selected interface for which a VLAN priority (VPT) is not defined. • Restore Defaults - Restore the factory CoS default settings to the selected interface. The possible field values are: - Checked - Restore the factory CoS default settings to the ports. - Unchecked - Maintain the current CoS settings. 2. Select the interface. 3. Select the Default CoS value from the list in the provided field in the first row. 4. Check or uncheck the Restore Defaults box in the interface entry row. 5. Click Apply to update the device. 5-4 Configuring QoS v1.0, March 2008