Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 1017
Color Are Off, Text And Lines Are Faint And Difficult To See
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1017 highlights
TROUBLESHOOTING►GENERAL PROBLEMS COLOR ARE OFF Check Did you perform "Registration Adjustment"? Solution ■ Ask your administrator to perform "Registration Adjustment". "Settings (administrator)" → [System Settings] → [Image Quality Adjustment] → [Collective Adjustment] → [Registration Adjustment] . If the color tones are off, perform [Auto Color Calibration (for Print)] after finishing registration adjustment. (If the colors are still off after calibration, repeating calibration may improve the results.) "Settings (administrator)" → [System Settings] → [Image Quality Adjustment] → [Common Functions] → [Auto Color Calibration (for Print)] TEXT AND LINES ARE FAINT AND DIFFICULT TO SEE Check Was color data printed in black and white? (Windows) Is the overall print density too light? Are there fine lines in the original data? Solution ■ Check the settings of the printer driver. When color text and lines are printed in black and white, they may become faint and difficult to see. To have color text or lines (areas) that could become faint converted to black, select [Text To Black] or [Vector To Black] on the [Image Quality] tab of the printer driver. (Raster data such as bitmap images cannot be adjusted.) ■ Use the setting below to change the overall print density. Select "Settings (Web version)" - [System Settings] → [Image Quality Adjustment] → [Print Image Quality] → [Quick Image Quality Adjustment]. Set default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to decrease the overall density. This setting can be set separately for color mode and monochrome mode. ■ Change the width of specific printed lines. Select "Settings (administrator)" - [System Settings] → [Image Quality Adjustment] → [Print Image Quality] → [Color Line Width Adjustment]. Increase the value of default setting [5] to make the lines thicker, or decrease the value to make the lines thinner. (Text and raster data such as bitmap images cannot be changed.) 10-34