Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 945
Easy Connection Setting
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 945 highlights
SETTING MODE►SYSTEM SETTINGS SSID Enter the SSID. Security Type Select a security type. Factory default settings:None Encry. Select an encryption type. Factory default settings:None Security Key Enter a security key. Security Type Security Key WEP WPA/WPA2-mixed Personal WPA/WPA2-mixed Enterprise WPA2 Personal WPA2 Enterprise WPA2/WPA3-mixed Personal WPA3 Personal WPA2/WPA3-mixed Enterprise WPA3 Enterprise WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2/WPA3: 8 to 63 characters or 64-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. Factory default settings: Disable Easy Connection Setting Set when using Easy Connection. NFC Set when connecting a mobile device to this unit using the NFC touch point area. Factory default settings: Disable NFC Signal Switches the mode of the NFC outgoing signal. Factory default settings: In United States and Europe: Mode2, others: Mode1 QR code You can install the dedicated application on the mobile device in advance, scan the displayed QR code, send the connection settings to the mobile device, and register it. Factory default settings: Enable Destination Set the connection destination to connect to and the connection destination to be registered in the QR code. To connect to this machine, select [Connect with the machine]. The information required when connecting to this machine is registered in the application. To select a connection destination other than this machine, select [Connect with the following access point]. When setting manually, obtain the network information of the connection destination in advance. If you select [Connect with the following access point], make the following settings. Factory default settings: Connect with the machine 9-171