Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 637

SCANNER/ INTERNET FAX►OTHER FUNCTIONS SCANNING ORIGINALS ERASING PERIPHERAL SHADOWS ON THE IMAGE (ERASE) When scanning thick originals or books, erase any peripheral shadows that may be produced on the image. Scanning a thick book When a bound document is scanned, shadows appear in the peripheral areas and around the binding portion of the scanned image. Not using the erase function Using the erase function Erase modes Outer Frame Erase Center Erase Shadows appear in the image. No shadows appear. Edge + Center Erase Side Erase • This function erases the parts of the image where shadows tend to form, but does not detect shadows and erase only the shadows. • If a ratio setting is used in combination with an erase setting, the erase width will change according to the selected ratio. For example, if you set an erase width of 1/2" (10 mm) and reduce the image to 70% before scanning it, the erase width will be reduced to 3/8" (7 mm). • When the erase setting is selected, the image orientation will be forcibly portrait. To change the default erase width setting: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Erase Width Adjustment]. The width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm). The setting changed here will apply to [System Settings] → [Copy Settings] → [Condition Settings] → [Erase Width Adjustment] in "Settings". 1 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. When in fax mode, then after completing this procedure, proceed to Step 3. AUTOMATIC DOCUMENT FEEDER (page 1-30) DOCUMENT GLASS (page 1-34) 6-131