Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 844

SETTING MODE►SYSTEM SETTINGS Port Number Set the port number used for print release in the primary unit and in the secondary unit. Be sure to set the same number in both the primary unit and the secondary unit. (The default port number is "53000", and there is no particular need to change this.) Factory default settings: 53000 Delete All When the machine functions as the primary unit, select this to delete all stored print release jobs. Destination Settings Primary Unit 1 to Primary Unit 3 Enter the addresses of the Primary Unit 1 to the Primary Unit 3. Connecting Code Enter a code for authentication between the primary unit and secondary unit. Maximum of 32 alphanumeric characters. Port Number Set the port number used for print release in the primary unit and in the secondary unit. Be sure to set the same number in both the primary unit and the secondary unit. (The default port number is "53000", and there is no particular need to change this.) Factory default settings: 53000 Advanced Settings Extend Destination Group You can increase the number of groups by using the extension. Factory default settings: Disable Default Group Select the group to be used in groups 1-10. You can set the selected group as the default group for use in print releases. It is convenient to set a frequently used group because it will always be set to the selected group. Factory default settings: Group 1 Destination Group Setting Set the group to connect to. Groups 1-10 Use This Group When [Enable] is selected, [Use This Group] is set on the print screen of the print release job. Factory default settings: Disable Primary Unit 1 address to Primary Unit 3 address, connection code, port number Set the address, connection code, and port number of the base unit 1 to base unit 3 used in the group. Factory default settings: Port Number:53000 9-70