Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 427
Fax Dest. Confirmation Mode
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 427 highlights
FACSIMILE►BASIC TRANSMISSION METHODS FAX DEST. CONFIRMATION MODE This mode displays a destination confirmation message when a fax is sent to prevent accidental transmission to the wrong destination. Set it in setting mode. If a fax is sent while this function is enabled, an address confirmation message will appear when the [Start] key is tapped. The message that appears will vary depending on the method used to specify the destination. After tapping the [Speaker] key while "Fax Dest. Confirmation Mode" is enabled, the destination cannot be specified using the numeric keys, one-touch key, [Call Search Number] key, or [Sending History] key. However, it is possible to send through a telephone. • To display the destination confirmation message prior to fax transmission: In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Fax Dest. Confirmation Mode]. • To check destinations other than fax: In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Fax Dest. Confirmation Mode] → [Apply to Addresses Other Than Fax]. • To disable fax broadcast when Fax Dest. Confirmation Mode is enabled: In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Disable Fax Broadcasting]. Destination specified by one-touch key/search number/global address search Tap the [Start] key to display all destinations in the destination confirmation screen. Check that the destinations are correct, and tap the [Enter for send] key to start scanning of the original. If the destination is not correct, tap the [OK] key and select the destination again. • You can select multiple one-touch keys for contacts or groups including fax destinations. • Before tapping the [Enter for send] key, you can change scan or other settings. 5-27