Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 425
Automatic Reduction Of The Transmitted, Image, Transmittable Original Sizes, The Size Of The Placed
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 425 highlights
FACSIMILE►BASIC TRANSMISSION METHODS AUTOMATIC REDUCTION OF THE TRANSMITTED IMAGE If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be automatically reduced to fit the receiving machine's paper width. Example: Reduced sizes and reduction ratios Transmitted image width Receiving machine's paper width Reduced size Scaling 11" x 17" (A3) 11" x 17" (A3) B4 B4 B4 8-1/2" x 11" (A4) A4R 8-1/2" x 11" (A4) A4R 1:0.8 1:0.7 1:0.8 To cancel the Auto Reduction Sending setting: In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Auto Reduction Sending Setting]. If this setting is disabled, the image will be sent at full size and part of the image may be cut off. TRANSMITTABLE ORIGINAL SIZES For information on the original sizes that can be loaded, see "AUTOMATIC DOCUMENT FEEDER (page 1-30)" and "DOCUMENT GLASS (page 1-34)". THE SIZE OF THE PLACED ORIGINAL When a standard size original is placed, the original size is automatically detected and displayed in "Scan Size" on the base screen. AUTO DETECTION (page 5-43) Standard sizes are sizes that the machine can automatically detect. The standard sizes are set in "Original Size Detector Setting" in setting mode. When the automatic original detection function is operating and the original (of inch or non-standard size) is placed, the closest size may be displayed or the original size may not appear. In this event, manually set the correct original size. SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-44) SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-46) To specify the size that the machine can automatically detect: In "Settings (administrator)", select the group of detected original sizes in [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] → [Original Size Detector Setting]. List of original size detector settings DETECTABLE ORIGINAL SIZES (page 1-28) 5-25