Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 950

SETTING MODE►SYSTEM SETTINGS Port Control For the various major ports used in the system, set the prohibition/permission and port number, and tap the [Register] key. The ports that can be set are as follows. Server Port Factory default settings Client Port Factory default settings HTTP HTTPS FTP Print Raw Print LPD IPP IPP-SSL/TLS Tandem Output Receive PC Scan Remote Operation Panel SNMPD SMB SMTP WSD Print Release Sharp OSA (Expansion Platform) • HTTP • HTTPS Port Control 80 443 21 9100 515 631 443 50001 52000 5900 161 53000 Enable/Dis able Enabled Enabled Enabled Enabled Enabled Enabled Disabled Enabled Enabled Enabled Enabled Disable Enabled Enabled Enabled HTTP HTTPS FTP FTPS SMTP SMTP-SSL/TLS POP3 POP3-SSL/TLS SNMP-TRAP Notify Job End LDAP LDAP-SSL/TLS SMB SNTP mDNS Tandem Output Send 10080 1443 Enabled Enabled Data Backup (Send) Print Release IPP INFRA syslog syslog-SSL/TLS Port Control 162 Enable/Dis able Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled 514 6514 Enabled Enabled Enabled Enabled Enabled Filter Setting You can set the filter by an IP or MAC address to prevent an unauthorised access to the machine via a network. Set the IP or MAC address filter and tap the [Store] key. Factory default settings: Disable IP Address Filter Settings This option sets an IP address. You can specify whether to allow or prohibit access to the machine from the IP address you set. Factory default settings: Enable 9-176